Section 11: Utilities
163
Charger Control
This menu allows manual control of the battery charge function. The
current battery voltage and charging state are displayed.
Charge Battery
Manually begins battery charging cycle.
Recondition Battery
Fully discharges and then automatically recharges the battery.
Fresh Battery Inserted
Resets the battery capacity scale percentage to 100% at the
current battery voltage.
These options are explained in detail in the following pages.
Recharging the Instrument
Warning: Read the warnings in Battery Management (page 161)
before charging the battery.
• Plug the power transformer into a standard power outlet and
the connector to the instrument’s charger socket.
If the battery charge level is less than 80% the battery will begin
charging automatically. You can continue to use the instrument while
the battery pack is being charged.
If the battery does not begin charging automatically follow the
instructions below to begin charging.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...
Need help?
General
