Section 11: Utilities
165
• Press to recondition the battery. Discharging is
indicated by the flashing 'DISCHARGING' message on the
screen.
The instrument automatically proceeds to charge the battery once
the battery pack is fully discharged.
Fresh Battery Inserted
This resets the battery capacity scale percentage to 100% at the
current battery voltage. This option should be used when a new, fully
recharged battery is exchanged for a discharged battery.
Caution: If this selection is made when the attached battery is not
fully charged the battery capacity scale will no longer be set
accurately. Performing a Recondition Battery will recharge the
battery and reset the scale.
Power Saver
Power saver is a feature that helps conserve power in the
instrument. Power saver will turn the LCD display off after 8 minutes
of inactivity (no key presses). The instrument will continue to function
and any key press will turn the LCD on to the previously displayed
screen. After 15 minutes of inactivity, power saver will power down
the instrument. If the battery is being recharged, only the LCD screen
will be turned off and the instrument will remain on until charging is
complete.
The power saver is automatically turned on every time the instrument
is powered up. You may turn it off temporarily by toggling power
saver OFF from the Battery Management Menu.
• To turn off Power Saver, from the Main Menu press
Battery Management.
• Press
to toggle Power Saver ON and OFF.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...
Need help?
General
