Section 6: Using Routes
91
Walk-through: Taking Recordings Using
a Route
Once the first recording has been taken you will automatically be
moved to the next location on the route. You can take recordings for
all other measurement locations sequentially, or jump to various
entries on the route.
• From the Main Menu press
to display the Select Route
Menu.
• Use the
or keys to highlight a route then press
to select it. The first location on your route will be displayed.
• Attach the sensor to the location indicated on the instrument
screen then press
When the instrument has finished collecting the data, the spectrum
or waveform will be displayed momentarily along with a message
confirming that the recording has been completed.
Note: The ON/OFF key can be used as a left-handed START key
when on a route. This feature must be turned on using the Options
Menu (accessed by pressing
from the Main Menu).
• Continue to take recordings using
until all the
measurements have been taken and you are returned to the
Main Menu. The route is now ready to be transferred to the
Ascent software.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...
Need help?
General
