Pointing Devices and Keyboard
Hardware Guide 3–11
Set Power Conservation Level (Fn+F7)
■
Windows 98 or Windows 2000 Professional—Press
Fn+F7
to open the Power Schemes window.
■
Windows NT 4.0—Press
Fn+F7
to open the Battery
Conservation Settings window. To select a preset battery
conservation level, choose among:
❏
High—Maximizes running time from a single charge.
❏
Medium—Balances system performance with
running time.
❏
None (Drain)—Runs the computer at full power.
For information about the custom level, refer on this CD to
the Compaq Utilities guide, “Power Management” section.
View Battery Charge Information (Fn+F8)
Press
Fn+F8
to display charge information about all installed
battery packs. The display indicates which battery packs are
charging and reports the amount of charge remaining in each
battery pack.
Battery pack locations are indicated by number: (1) is the
computer battery bay and (2) is the computer MultiBay. Any
additional locations displayed represent docking base bays, which
vary by model and configuration. Refer to your docking base
documentation for specific bay location information.
229045-002.book Page 11 Friday, September 21, 2001 11:16 AM
To Next Page
Loading...
Need help?
General