Hardware Upgrades
Hardware Guide 8–7
Removing or Inserting a Memory Expansion
Board
Å
WARNING: The memory and mini PCI compartments are the only
user-accessible internal compartments on the computer. All other
areas that require a tool to access should be opened only by a
Compaq authorized service provider.
Å
WARNING: Failure to unplug the power cord and remove all battery
packs before installing a memory expansion board can damage the
equipment and expose you to the risk of electrical shock.
Ä
CAUTION: Electrostatic discharge (ESD) can damage electronic
components. Before beginning any procedure, ensure that you are
discharged of static electricity by touching a grounded metal object.
For more information, refer on this CD to
Regulatory and Safety
Notices.
1. Shut down the computer. (If you are not sure whether the
computer is off or in Hibernation, turn the computer on, then
shut it down.)
2. Disconnect all external devices connected to the computer.
3. Disconnect the power cord.
4. Remove any battery packs in the computer.
5. Turn the computer bottom-side up.
229045-002.book Page 7 Friday, September 21, 2001 11:16 AM
To Next Page
Loading...
Need help?
General