To Next Page

To Previous Page

Pointing Devices and Keyboard

Hardware Guide 3–13

Using the Fn Key Sequentially

Many commands are entered by simultaneously pressing the

key and another key. For example, hotkey commands are

entered by pressing

Fn +

a function key.

If you enable sequential

commands, all commands that can be

entered by simultaneously pressing the

key and another key

can also be entered by sequentially pressing

and the other key.

While this feature is enabled:

■

Whenever you press the

key, the computer beeps to

indicate that the next key you press will be interpreted as the

other key of an

command.

■ Fn

commands can still be entered by simultaneously pressing

the

key and the other key of the

command.

To enable the sequential feature, press the

key 5 times. A beep

confirms that the feature is enabled. The feature remains enabled

until you disable it.

To disable this feature, press the

key 5 times. No beep sounds,

indicating that the feature has been disabled.

Identifying the Fn key

229045-002.book Page 13 Friday, September 21, 2001 11:16 AM

Compaq Evo N600c Series User Manual

Questions and Answers: