8–2 Hardware Guide
Hardware Upgrades
When the computer is used with any docking base:
■
The computer cannot be docked while a PC Card or cable is
protruding from the lower PC Card slot.
■
The lower PC Card slot is inaccessible while the computer is
docked.
When the computer is used with an Expansion Base in a vertical
stand, both PC Card slots and PC Card eject buttons are
inaccessible.
Configuring a PC Card
Ä
CAUTION: If you install all of the software or any of the enablers
provided by a PC Card manufacturer, you may not be able to use other
PC Cards. If you are instructed by the documentation included with
your PC Card to install device drivers:
■
Install only the device drivers for your operating system.
■
Do not install other software, such as card services, socket
services, or enablers, that may also be supplied by the PC Card
manufacturer.
Windows 98 and Windows 2000 Professional configure plug and
play PC Cards.
To configure a PC Card In Windows NT 4.0 with CardWare
provided by Compaq:
1. Insert the PC Card.
2. Select Start > Programs > CardWare to open the
CardWare window.
3. Follow the instructions on the screen. For additional
instructions, select the Help menu within CardWare.
229045-002.book Page 2 Friday, September 21, 2001 11:16 AM
To Next Page
Loading...
Need help?
General