5–10 Hardware Guide
Removable Drives
1. If the drive has a media tray, remove the media, then close
the tray.
2. Follow the instructions in the preceding caution, then close
the display.
3. Turn the computer bottom-side up
1
.
4. Slide the MultiBay release latch
2
toward the rear of
the computer.
5. Pull the drive or drive assembly out of the MultiBay
3
.
Removing a drive from the MultiBay
✎
When no device is in the MultiBay, insert the weight saver to
reduce computer weight and protect the bay opening. The weight
saver can be inserted or removed at any time.
229045-002.book Page 10 Friday, September 21, 2001 11:16 AM
To Next Page
Loading...
Need help?
General