1–2 Hardware Guide
Hardware and Software Setup
1. Place the computer on a flat surface near an electrical outlet,
then connect the computer to external AC power.
Plug the AC Adapter cable into the DC power connector
1
.
Plug the power cord into the AC Adapter
2
and into an
electrical outlet
3
. (Power cords and outlets vary by country.)
Connecting the computer to external power
2. Open the computer by sliding the display release latch to the
right
1
and raising the display
2
.
Opening the computer
229045-002.book Page 2 Friday, September 21, 2001 11:16 AM
To Next Page
Loading...
Need help?
General