W
INDOWS
2000 O
PERATING
S
YSTEM
M
ANUAL
N
OTEBOOK
C
ONFIGURATION
2-19
Testing the No Ethernet Profile
You must restart Windows to test the No Ethernet profile. To test
the No Ethernet profile, complete the following steps.
1. Restart your Notebook by selecting Start, Shutdown, and
then Restart from the drop-down menu.
2. When prompted for the Hardware Profile, select
No Ethernet.
3. When prompted, type in your login password.
Note: The Windows login dialog box is displayed rather than the Network
login dialog box. If your Notebook is set for multiple users, you will be
prompted to log on.
To Next Page
Loading...
Need help?
General