Name: D-Link DIR-815
Brand: D-Link
Rating: 5 (1 reviews)

To Next Page

To Previous Page

DIR-815 AC1200 Wave 2 MU-MIMO Wi-Fi

Router with 3G/LTE Support and USB Port

User Manual

Configuring via Web-based Interface

Client

On the Wi-Fi / Client page, you can configure the router as a client to connect to a wireless access

point or to a WISP.

Figure 108. The page for configuring the client mode.

To configure the router as a client, move the Enable switch to the right. Upon that the following

fields are displayed on the page:

Parameter Description

Broadcast wireless

network 2.4 GHz /

Broadcast wireless

network 5 GHz

If the switch is moved to the left, devices cannot connect to the

router's WLAN. Upon that the router can connect to another access

point as a wireless client.

Connecting to network

A method for connecting to another access point.

In the Wireless Networks section, the list of available wireless networks is displayed. To view

the latest data on available wireless networks, click the UPDATE LIST button.

To connect to a wireless network from the list, select the needed network. Move the Network

options switch to the right to view more detailed information on the network to which the router

connects. If a password is required, enter it in the relevant field. Click the CONNECT button.

Page 138 of 240

Other manuals for D-Link DIR-815

Questions and Answers:

Need help?

Do you have a question about the D-Link DIR-815 and is the answer not in the manual?

Wireless Signal Rates

IEEE 802.11n 20MHz Channel 1Nss	65/72.2 Mbps (max)
IEEE 802.11n 20MHz Channel 2Nss	130/144.44 Mbps (max)
IEEE 802.11n 40MHz Channel 1Nss	135/150 Mbps (max)
IEEE 802.11n 40MHz Channel 2Nss	270/300 Mbps (max)
IEEE 802.11a	54 Mbps - 48Mbps - 36Mbps - 24Mbps - 18Mbps - 12Mbps - 9Mbps - 6Mbps
IEEE 802.11g	54Mbps - 48Mbps - 36Mbps - 24Mbps - 18Mbps - 12Mbps - 11Mbps - 9Mbps - 6Mbps

Wireless Frequency Range