Name: D-Link DIR-815
Brand: D-Link
Rating: 5 (1 reviews)

To Next Page

To Previous Page

DIR-815 AC1200 Wave 2 MU-MIMO Wi-Fi

Router with 3G/LTE Support and USB Port

User Manual

Configuring via Web-based Interface

System Time

On the System / System Time page, you can manually set the time and date of the router or

configure automatic synchronization of the system time with a time server on the Internet.

Figure 177. The System / System Time page.

To set the system time manually, follow the next steps:

1. Move the Enable NTP switch to the left.

2. In the Time Settings section, specify needed values. To specify the time set up your PC or

portable device, click the SET LOCAL TIME button.

3. Click the APPLY button. The System date and System time fields will be filled in

automatically.

To enable automatic synchronization with a time server, follow the next steps:

1. Move the Enable NTP switch to the right.

2. Specify the needed NTP server or leave the value specified by default in the NTP Servers

section. If you need to specify several servers, click the ADD SERVER button.

3. Select your time zone from the Main time zone drop-down list. To set the time zone in

accordance with the settings of your operating system or portable device, click the

DETERMINE TIMEZONE button.

Page 233 of 240

Other manuals for D-Link DIR-815

Questions and Answers:

Need help?

Do you have a question about the D-Link DIR-815 and is the answer not in the manual?

Wireless Signal Rates

IEEE 802.11n 20MHz Channel 1Nss	65/72.2 Mbps (max)
IEEE 802.11n 20MHz Channel 2Nss	130/144.44 Mbps (max)
IEEE 802.11n 40MHz Channel 1Nss	135/150 Mbps (max)
IEEE 802.11n 40MHz Channel 2Nss	270/300 Mbps (max)
IEEE 802.11a	54 Mbps - 48Mbps - 36Mbps - 24Mbps - 18Mbps - 12Mbps - 9Mbps - 6Mbps
IEEE 802.11g	54Mbps - 48Mbps - 36Mbps - 24Mbps - 18Mbps - 12Mbps - 11Mbps - 9Mbps - 6Mbps

Wireless Frequency Range