Name: D-Link DIR-815
Brand: D-Link
Rating: 5 (1 reviews)

To Next Page

To Previous Page

DIR-815 AC1200 Wave 2 MU-MIMO Wi-Fi

Router with 3G/LTE Support and USB Port

User Manual

Configuring via Web-based Interface

UPnP IGD

On the Advanced / UPnP IGD page, you can enable the UPnP IGD protocol. The router uses the

UPnP IGD protocol for automatic configuration of its parameters for network applications requiring

an incoming connection to the router.

Figure 148. The Advanced / UPnP IGD page.

If you want to manually specify all parameters needed for network applications, click the

DISABLE button. Then go to the Firewall / Virtual Servers page and specify needed settings.

If you want to enable the UPnP IGD protocol in the router, click the ENABLE button.

When the protocol is enabled, the router's parameters configured automatically are displayed on the

page:

Parameter Description

Protocol A protocol for network packet transmission.

IP address

The IP address of a client from the local area network.

Private port

A port of a client's IP address to which traffic is directed from a

public port of the router.

Public port

A public port of the router from which traffic is directed to a client's

IP address.

Description Information transmitted by a client's network application.

Page 189 of 240

Other manuals for D-Link DIR-815

Questions and Answers:

Need help?

Do you have a question about the D-Link DIR-815 and is the answer not in the manual?

Wireless Signal Rates

IEEE 802.11n 20MHz Channel 1Nss	65/72.2 Mbps (max)
IEEE 802.11n 20MHz Channel 2Nss	130/144.44 Mbps (max)
IEEE 802.11n 40MHz Channel 1Nss	135/150 Mbps (max)
IEEE 802.11n 40MHz Channel 2Nss	270/300 Mbps (max)
IEEE 802.11a	54 Mbps - 48Mbps - 36Mbps - 24Mbps - 18Mbps - 12Mbps - 9Mbps - 6Mbps
IEEE 802.11g	54Mbps - 48Mbps - 36Mbps - 24Mbps - 18Mbps - 12Mbps - 11Mbps - 9Mbps - 6Mbps

Wireless Frequency Range