Name: D-Link DIR-815
Brand: D-Link
Rating: 5 (1 reviews)

To Next Page

To Previous Page

DIR-815 AC1200 Wave 2 MU-MIMO Wi-Fi

Router with 3G/LTE Support and USB Port

User Manual

Configuring via Web-based Interface

Redirect

On the Advanced / Redirect page, you can enable notifications on the reason of the Internet

connection failure. Notifications will be displayed in the browser window when a user is attempting

to open a web site on the Internet.

Figure 144. The Advanced / Redirect page.

To configure notifications, click the ENABLE button. Then, in the Reasons for Redirect

section, move the needed switches to the right.

Parameter Description

Reasons for Redirect

Physical connection

error

Notifications in case of physical connection problems (the ISP's

cable is not connected, an additional device needed to access the

Internet is not connected).

The device is not

configured

Notifications in case when the device works with default settings.

No connection

Notifications in case of problems of the default WAN connection

(authorization error, the IPS's server does not respond, etc.).

When you have configured the parameters, click the APPLY button.

To disable notifications, click the DISABLE button.

Page 184 of 240

Other manuals for D-Link DIR-815

Questions and Answers:

Need help?

Do you have a question about the D-Link DIR-815 and is the answer not in the manual?

Wireless Signal Rates

IEEE 802.11n 20MHz Channel 1Nss	65/72.2 Mbps (max)
IEEE 802.11n 20MHz Channel 2Nss	130/144.44 Mbps (max)
IEEE 802.11n 40MHz Channel 1Nss	135/150 Mbps (max)
IEEE 802.11n 40MHz Channel 2Nss	270/300 Mbps (max)
IEEE 802.11a	54 Mbps - 48Mbps - 36Mbps - 24Mbps - 18Mbps - 12Mbps - 9Mbps - 6Mbps
IEEE 802.11g	54Mbps - 48Mbps - 36Mbps - 24Mbps - 18Mbps - 12Mbps - 11Mbps - 9Mbps - 6Mbps

Wireless Frequency Range