Name: D-Link DIR-815
Brand: D-Link
Rating: 5 (1 reviews)

To Next Page

To Previous Page

DIR-815 AC1200 Wave 2 MU-MIMO Wi-Fi

Router with 3G/LTE Support and USB Port

User Manual

Configuring via Web-based Interface

FTP

On the USB Storage / FTP page, you can enable the built-in FTP server of the router to provide

access to the USB storage for users of your LAN.

Figure 121. The USB Storage / FTP page.

To enable the FTP server, move the Enable FTP server switch to the right.

Move the Anonymous login switch to the right to allow anonymous access to the content of the

USB storage for users of your LAN. If you want to provide authorized access to the content of the

USB storage for users of your LAN, move the switch to the left. After applying the parameters on

this page, go to the USB Storage / USB Users page and create needed accounts.

If needed, change the router's port used by the FTP server in the Port field (by default, the standard

port 21 is specified).

To allow access only to a certain folder of the USB storage for users of your LAN, locate a folder

containing files. To do this, click the Search icon ( ) in the Directory field. Then go to the

needed folder and click the SELECT button.

After specifying the needed parameters, click the APPLY button.

Page 158 of 240

Other manuals for D-Link DIR-815

Questions and Answers:

Need help?

Do you have a question about the D-Link DIR-815 and is the answer not in the manual?

Wireless Signal Rates

IEEE 802.11n 20MHz Channel 1Nss	65/72.2 Mbps (max)
IEEE 802.11n 20MHz Channel 2Nss	130/144.44 Mbps (max)
IEEE 802.11n 40MHz Channel 1Nss	135/150 Mbps (max)
IEEE 802.11n 40MHz Channel 2Nss	270/300 Mbps (max)
IEEE 802.11a	54 Mbps - 48Mbps - 36Mbps - 24Mbps - 18Mbps - 12Mbps - 9Mbps - 6Mbps
IEEE 802.11g	54Mbps - 48Mbps - 36Mbps - 24Mbps - 18Mbps - 12Mbps - 11Mbps - 9Mbps - 6Mbps

Wireless Frequency Range