Name: D-Link DIR-815
Brand: D-Link
Rating: 5 (1 reviews)

To Next Page

To Previous Page

DIR-815 AC1200 Wave 2 MU-MIMO Wi-Fi

Router with 3G/LTE Support and USB Port

User Manual

Installation and Connection

Obtaining IP Address Automatically and Connecting to'Wireless

Network (OS Windows 7)

1. Click the Start button and proceed to the Control Panel window.

2. Select the Network and Sharing Center section. (If the Control Panel has the category

view (the Category value is selected from the View by drop-down list in the top right

corner of the window), choose the View network status and tasks line under the

Network and Internet section.)

Figure 13. The Control Panel window.

3. In the menu located on the left part of the window, select the Change adapter settings

line.

4. In the opened window, right-click the relevant Wireless Network Connection icon.

Make sure that your Wi-Fi adapter is on, then select the Properties line in the menu

displayed.

5. In the Wireless Network Connection Properties window, on the Networking tab,

select the Internet Protocol Version 4 (TCP/IPv4) line. Click the Properties button.

Page 34 of 240

Other manuals for D-Link DIR-815

Questions and Answers:

Need help?

Do you have a question about the D-Link DIR-815 and is the answer not in the manual?

Wireless Signal Rates

IEEE 802.11n 20MHz Channel 1Nss	65/72.2 Mbps (max)
IEEE 802.11n 20MHz Channel 2Nss	130/144.44 Mbps (max)
IEEE 802.11n 40MHz Channel 1Nss	135/150 Mbps (max)
IEEE 802.11n 40MHz Channel 2Nss	270/300 Mbps (max)
IEEE 802.11a	54 Mbps - 48Mbps - 36Mbps - 24Mbps - 18Mbps - 12Mbps - 9Mbps - 6Mbps
IEEE 802.11g	54Mbps - 48Mbps - 36Mbps - 24Mbps - 18Mbps - 12Mbps - 11Mbps - 9Mbps - 6Mbps

Wireless Frequency Range