Name: D-Link DIR-815
Brand: D-Link
Rating: 5 (1 reviews)

To Next Page

To Previous Page

DIR-815 AC1200 Wave 2 MU-MIMO Wi-Fi

Router with 3G/LTE Support and USB Port

User Manual

Configuring via Web-based Interface

Firmware Update

On the System / Firmware Update page, you can update the firmware of the router and

configure the automatic check for updates of the router's firmware.

Update the firmware only when the router is connected to your PC via a wired

connection.

Figure 169. The System / Firmware Update page.

The current version of the router's firmware is displayed in the Current firmware version field.

By default, the automatic check for the router's firmware updates is enabled. If a firmware update is

available, a notification will be displayed in the top right corner of the page.

To disable the automatic check for firmware updates, in the Remote Update section, move the

Check for updates automatically switch to the left and click the APPLY SETTINGS button.

To enable the automatic check for firmware updates, in the Remote Update section, move the

Check for updates automatically switch to the right and click the APPLY SETTINGS button.

By default, in the Remote server URL field, the D-Link update server address

(fwupdate.dlink.ru) is specified.

You can update the firmware of the router locally (from the hard drive of your PC) or remotely

(from the update server).

Page 222 of 240

Other manuals for D-Link DIR-815

Questions and Answers:

Need help?

Do you have a question about the D-Link DIR-815 and is the answer not in the manual?

Wireless Signal Rates

IEEE 802.11n 20MHz Channel 1Nss	65/72.2 Mbps (max)
IEEE 802.11n 20MHz Channel 2Nss	130/144.44 Mbps (max)
IEEE 802.11n 40MHz Channel 1Nss	135/150 Mbps (max)
IEEE 802.11n 40MHz Channel 2Nss	270/300 Mbps (max)
IEEE 802.11a	54 Mbps - 48Mbps - 36Mbps - 24Mbps - 18Mbps - 12Mbps - 9Mbps - 6Mbps
IEEE 802.11g	54Mbps - 48Mbps - 36Mbps - 24Mbps - 18Mbps - 12Mbps - 11Mbps - 9Mbps - 6Mbps

Wireless Frequency Range