Name: D-Link DIR-815
Brand: D-Link
Rating: 5 (1 reviews)

To Next Page

To Previous Page

DIR-815 AC1200 Wave 2 MU-MIMO Wi-Fi

Router with 3G/LTE Support and USB Port

User Manual

Configuring via Web-based Interface

Access Point or Repeater

In order to connect your device to a wired router for adding a wireless network to the existing local

network, on the Device mode page, from the Connection method list, select the Wired

connection value. Then from the Work mode list select the Access point value. In this mode

you can change the LAN IP address, set your own settings for the wireless network in the 2.4GHz

and 5GHz bands, and set your own password for access to the web-based interface of the device.

Figure 36. Selecting an operation mode. The Access point mode.

In order to connect your device to a wireless router for extending the range of the existing wireless

network, on the Device mode page, from the Connection method list, select the Wi-Fi value.

Then from the Work mode list select the Repeater value. In this mode you can change the LAN

IP address, connect your device to another access point, set your own settings for the wireless

network in the 2.4GHz and 5GHz bands, and set your own password for access to the web-based

interface of the device.

Figure 37. Selecting an operation mode. The Repeater mode.

Page 51 of 240

Other manuals for D-Link DIR-815

Questions and Answers:

Need help?

Do you have a question about the D-Link DIR-815 and is the answer not in the manual?

Wireless Signal Rates

IEEE 802.11n 20MHz Channel 1Nss	65/72.2 Mbps (max)
IEEE 802.11n 20MHz Channel 2Nss	130/144.44 Mbps (max)
IEEE 802.11n 40MHz Channel 1Nss	135/150 Mbps (max)
IEEE 802.11n 40MHz Channel 2Nss	270/300 Mbps (max)
IEEE 802.11a	54 Mbps - 48Mbps - 36Mbps - 24Mbps - 18Mbps - 12Mbps - 9Mbps - 6Mbps
IEEE 802.11g	54Mbps - 48Mbps - 36Mbps - 24Mbps - 18Mbps - 12Mbps - 11Mbps - 9Mbps - 6Mbps

Wireless Frequency Range