HDCVI Series DVR User’s Manual
Here you can set device alarm type and alarm sound setup (Please make sure you have enabled audio
function of corresponding alarm events.).
Figure 5-101
Please refer to the following sheet for detailed information.
System alarms when video loss occurs.
System alarms when motion detection alarm
occurs.
System alarms when camera is viciously masking.
System alarms when disk is full.
System alarms when disk error occurs.
Alarm input device sends out alarm.
Check the box here, system can automatically
pops up an alarm icon on the Alarm button in the
main interface when there is an alarm.
System sends out alarm sound when an alarm
occurs. You can specify as you wish.
Here you can specify alarm sound file.
5.12 Log out
Click log out button, system goes back to log in interface. See Figure 5-102.
You need to input user name and password to login again.
To Next Page
Loading...
Need help?
General