4. After the power cell is in place, use M6 screws to fix the corners to the fixing support.
Illustration 40: Power Cell Installation
5.4 Dimensions of the Enclosed Drive
See the dimensions of the drive cabinet in 11.2 Power Ratings and Dimensions.
Always refer to the delivery-specific information for the accurate dimensions.
5.5 Cooling and Free Space Around the Enclosed Drive
The AC drive produces heat in operation. VACON® 1000 uses forced air cooling to control the temperature of the transformer, power
cells, and other components. Fans on the top of the cabinet provide the airflow. The cool air is drawn into the cabinet through the
inlet and directed out from the outlet as shown in the picture.
Illustration 41: Flow of Cooling Air
Make sure that the temperature of the cooling air does not become higher than the maximum ambient operating temperature or
lower than the minimum ambient operating temperature of the drive. See 5.1 Operating Environment.
AQ363633621020en-000201 / 172F3117 | 45Danfoss A/S © 2021.06
Mechanical Installation
VACON® 1000
Operating Guide
To Next Page
Loading...
Need help?
General
