Danfoss VACON 1000 User Manual

•
•
•
•
•
•
•
•
-
7 Human-Machine Interface
7.1 The VACON® 1000 HMI
By using a high-quality touch-screen HMI (human-machine interface), simple and visual operation are possible to achieve for all the
functions of VACON® 1000, such as:
Parameter setting
Operation status
Fault diagnosis
To ensure operation safety, the user interface is protected by password that only opens up for authorized operators.
7.2 HMI Homepage
The homepage of the VACON® 1000 HMI is shown in Illustration 55. The homepage shows:
Single-line diagram
System status
Dashboard
Access the submenus from the menu on the left side of the homepage, and the control panel from the icon in the lower right cor-
ner.
A
B
C
D
E
H
I
J
F
G
e30bi733.10
Illustration 55: HMI Homepage
A
Status
B
Graphs & Reports
C
Setup & Service
D
Events
E
Single-line diagram
F
Administration
G
Tool Settings
H
System Status
I
Dashboard
J
Control panel
7.2.1 System Status
When the system is in a specific state, the indicator of this state turns from gray to green.
Emergency stop: The emergency Stop button on the control cabinet is pressed down.
MCB close allowed: The system is ready, but the HV breaker is not closed.
The MCB can be closed.
AQ363633621020en-000201 / 172F3117 | 63Danfoss A/S © 2021.06
Human-Machine Interface
VACON® 1000
Operating Guide

Danfoss VACON 1000 Specifications

General

Brand	Danfoss
Model	VACON 1000
Category	Media Converter
Language	English