Danfoss VACON 1000 User Manual

•
•
•
•
•
•
•
•
•
-
-
•
-
•
-
•
-
•
•
7.6.1 Operation Mode
Use this submenu to select the operation mode and the reference set.
Operation mode options:
HMI: The drive is operated by HMI.
Digital: The drive is operated by DCS (the remote digital control of the drive, see 6.9.4 Application Wiring Example for the specif-
ic interface definition).
Communication: The drive is operated by communication, such as RS485 or Ethernet.
Reference set options:
HMI: Speed is set by HMI.
Analog: Speed is set by analog input.
Digital: Speed is set by DCS (the remote digital control of the drive, see 6.9.4 Application Wiring Example for the specific inter-
face definition).
Communication: Speed is set by communication, such as RS485 or Ethernet.
PID: Speed is adjusted automatically by PID module.
e30bi740.10
Illustration 60: Operation Mode Submenu
7.6.2 Motor Parameter
Use this submenu to select the motor parameters:
Multi-motor configuration
Select different motors through HMI, digital input, or communication.
Set the maximum number of motors.
Rated parameter
Set the rated frequency, rated speed, pole number, rated voltage, and rated current for different motors.
Speed operation configuration
Set the rotation direction, maximum speed, and minimum speed for different motors.
Auto tuning parameter
Check the parameters regarding auto tuning.
Speed controller
Flux controller
AQ363633621020en-000201 / 172F3117 | 67Danfoss A/S © 2021.06
Human-Machine Interface
VACON® 1000
Operating Guide

Danfoss VACON 1000 Specifications

General

Brand	Danfoss
Model	VACON 1000
Category	Media Converter
Language	English