Danfoss VLT CDS 803 Programming Guide

Contents
1 Introduction
3
1.1 Purpose of the Manual
3
1.2 Document and Software Version
3
1.3 Safety Symbols
3
1.4 Safety Precautions
3
1.5 Conventions
4
1.6 Additional Resources
4
1.7 Denitions
5
1.8 Electrical Overview
7
2 How to Program
8
2.1 Programming with MCT 10 Set-up Software
8
2.2 Local Control Panel (LCP)
8
2.3 Menus
9
2.3.1 Status Menu 9
2.3.2 Quick Menu 9
2.3.3 Main Menu 16
2.4 Quick Transfer of Parameter Settings between Multiple Frequency Converters
17
2.5 Readout and Programming of Indexed Parameters
17
2.6 Initialize the Frequency Converter to Default Settings in 2 Ways
17
3 Parameters
18
3.1 Main Menu - Operation and Display - Group 0
18
3.2 Main Menu - Load and Motor - Group 1
21
3.3 Main Menu - Brakes - Group 2
23
3.4 Main Menu - Reference/Ramps - Group 3
23
3.5 Main Menu - Limits/Warnings - Group 4
26
3.6 Main Menu - Digital In/Out - Group 5
27
3.7 Main Menu - Analog In/Out - Group 6
35
3.8 Main Menu - Communications and Options - Group 8
40
3.9 Main Menu - Smart Logic - Group 13
45
3.10 Main Menu - Special Functions - Group 14
54
3.11 Main Menu - Drive Information - Group 15
57
3.12 Main Menu - Data Readouts - Group 16
58
3.13 Main Menu - Drive Closed Loop - Group 20
63
3.14 Main Menu - Compressor Functions - Group 28
64
4 Troubleshooting
66
4.1 Alarms and Warnings
66
4.2 Alarm Words
69
Contents Programming Guide
MG18P202 Danfoss A/S © 06/2019 All rights reserved. 1

Danfoss VLT CDS 803 Specifications

General

Brand	Danfoss
Model	VLT CDS 803
Category	DC Drives
Language	English