Danfoss VLT CDS 803 Programming Guide

5.1.2 0-** Operation/Display
Par.
No. #
Parameter description Default value 2-set-up Change
during
operation
Conver-
sion index
Type
0-0* Basic Settings
0-01 Language [0] English 1 set-up TRUE - Uint8
0-04 Operating State at Power-up [0] Resume All set-ups TRUE - Uint8
0-06 GridType ExpressionLimit 1 set-up FALSE - Uint8
0-07 Auto DC Braking [1] On 1 set-up FALSE - Uint8
0-1* Set-up Operations
0-10 Active Set-up [1] Set-up 1 1 set-up TRUE - Uint8
0-11 Programming Set-up [9] Active Set-up 1 set-up TRUE - Uint8
0-12 Link Setups [20] Linked All set-ups FALSE - Uint8
0-3* LCP Custom Readout
0-30 Custom Readout Unit [1] % 1 set-up TRUE - Uint8
0-31 Custom Readout Min Value 0 CustomReadoutUnit 1 set-up TRUE -2 Int32
0-32 Custom Readout Max Value 100 CustomReadoutUnit 1 set-up TRUE -2 Int32
0-4* LCP Keypad
0-40 [Hand on] Key on LCP [1] Enabled All set-ups TRUE - Uint8
0-42 [Auto on] Key on LCP [1] Enabled All set-ups TRUE - Uint8
0-44 [O/Reset] Key on LCP [1] Enabled All set-ups TRUE - Uint8
0-5* Copy/Save
0-50 LCP Copy [0] No copy 1 set-up FALSE - Uint8
0-51 Set-up Copy [0] No copy 1 set-up FALSE - Uint8
0-6* Password
0-60 Main Menu Password 0 N/A 1 set-up TRUE 0 Uint16
Parameter Lists
VLT
®
Compressor Drive CDS 803
76 Danfoss A/S © 06/2019 All rights reserved. MG18P202
55

Danfoss VLT CDS 803 Specifications

General

Brand	Danfoss
Model	VLT CDS 803
Category	DC Drives
Language	English