Danfoss VLT FC 302 User Manual

6.3.13 12-** Ethernet
Par. No. # Parameter description Default value 4-set-up FC 302
only
Change
during
operation
Conver-
sion
index
Type
12-0* IP Settings
12-00 IP Address Assignment null 2 set-ups TRUE - Uint8
12-01 IP address 0 N/A 1 set-up TRUE 0 OctStr[4]
12-02 Subnet mask 0 N/A 1 set-up TRUE 0 OctStr[4]
12-03 Default gateway 0 N/A 1 set-up TRUE 0 OctStr[4]
12-04 DHCP server 0 N/A 2 set-ups TRUE 0 OctStr[4]
12-05 Lease expires App.Dependent All set-ups TRUE 0 TimD
12-06 Name servers 0 N/A 1 set-up TRUE 0 OctStr[4]
12-07 Domain name 0 N/A 1 set-up TRUE 0 VisStr[48]
12-08 Host name 0 N/A 1 set-up TRUE 0 VisStr[48]
12-09 Physical address 0 N/A 1 set-up TRUE 0 VisStr[17]
12-1* Ethernet Link Parameters
12-10 Link status [0] No link 1 set-up TRUE - Uint8
12-11 Link duration App.Dependent All set-ups TRUE 0 TimD
12-12 Auto negotiation [1] On 2 set-ups TRUE - Uint8
12-13 Link speed [0] None 2 set-ups TRUE - Uint8
12-14 Link duplex [1] Full duplex 2 set-ups TRUE - Uint8
12-2* Process Data
12-20 Control instance App.Dependent 1 set-up TRUE 0 Uint8
12-21 Process data config write App.Dependent All set-ups TRUE - Uint16
12-22 Process data config read App.Dependent All set-ups TRUE - Uint16
12-23 Process data config write size 16 N/A All set-ups TRUE 0 Uint32
12-24 Process data config read size 16 N/A All set-ups TRUE 0 Uint32
12-27 Primary master 0 N/A 1 set-up FALSE 0
12-28 Store data values [0] Off All set-ups TRUE - Uint8
12-29 store always [0] Off 1 set-up TRUE - Uint8
12-3* EtherNet/IP
12-30 Warning parameter 0 N/A All set-ups TRUE 0 Uint16
12-31 Net reference [0] Off 2 set-ups TRUE - Uint8
12-32 Net control [0] Off 2 set-ups TRUE - Uint8
12-33 CIP revision App.Dependent All set-ups TRUE 0 Uint16
12-34 CIP product code App.Dependent 1 set-up TRUE 0 Uint16
12-35 EDS parameter 0 N/A All set-ups TRUE 0 Uint32
12-37 COS inhibit timer 0 N/A All set-ups TRUE 0 Uint16
12-38 COS filter 0 N/A All set-ups TRUE 0 Uint16
12-4* Modbus TCP
12-40 Status parameter 0 N/A All set-ups TRUE 0 Uint16
12-41 Slave message count 0 N/A All set-ups TRUE 0 Uint32
12-42 Slave exception message count 0 N/A All set-ups TRUE 0 Uint32
12-5* EtherCAT
12-50 Configured station alias 0 N/A 1 set-up FALSE 0 Uint16
12-51 Configured station address 0 N/A All set-ups TRUE 0 Uint16
12-59 EtherCAT status 0 N/A All set-ups TRUE 0 Uint32
Programming Operating Instructions
MG37A202 Danfoss A/S © Rev. 2014-07-29 All rights reserved. 89
6 6

Danfoss VLT FC 302 Specifications

General

Brand	Danfoss
Model	VLT FC 302
Category	Controller
Language	English