Laser Pointer Period
Product Reference Guide 43
Laser Pointer Period
This option specifies the period of the laser pointer blink during scanning. The laser
pointer will be activated for the time specified by Laser Pointer Control then start blinking
OFF then ON at a 50% duty cycle and a repeating period set by Laser Pointer Period.
ENTER/EXIT PROGRAMMING MODE
Laser Pointer Period = Laser Pointer Blinking Off
Laser Pointer Period = 500 ms
Laser Pointer Period = 1 Second
Laser Pointer Period = 1.5 Seconds
Laser Pointer Period = 2 Seconds
DEFAULT
To Next Page
Loading...
Need help?
General
