Dell 5110cn - Color Laser Printer User Manual

"Print Quality" is used to diagnose print quality defects.
On the Customer Mode menu, go down to Cyan20%, Magenta20%, Yellow20%, or Black20% and press
.
1.
Cyan20%
Outputs cyan toner at 20% density on the whole area of the paper.
Magenta20%
Outputs magenta toner at 20% density on the whole area of the paper.
Yellow20%
Outputs yellow toner at 20% density on the whole area of the paper.
Black20%
Outputs black toner at 20% density on the whole area of the paper.
After you output the test results, contact Dell.
Testing "Toner Pallet Check" or "Contamination Chk"
"Toner Pallet Check" and "Contamination Chk" are used to diagnose machine problems.
On the Customer Mode menu, go down to TonerPalletCheck or ContaminationChk, and press .1.
Toner Pallet
Check
Allows you to identify the problem with the toner when print quality problems occur
while printing pictures or photos.
Contamination
Check
Allows you to check for any regular lines or spots when printing if print quality
problems are occurring.
After you output the test results, contact Dell.
Clear NVRAM
You can restore the original factory default menu settings by initializing NVRAM.
Press Menu.1.
Press until Admin Menu appears, and then press or .2.
Press until Maintenance appears, and then press or .3.
Press until Reset Defaults appears, and then press or .4.
5.

Dell 5110cn - Color Laser Printer Specifications

General

Print Technology	Laser
Print Speed (Color)	35 ppm
Print Resolution	600 x 600 dpi
Connectivity	USB 2.0, Ethernet
Processor Speed	400 MHz
Print Speed (Black)	35 ppm