If no value is specified, it is treated as "0"(Normal).
File
/usr/local/dellbin5110/.dellpsdefault5110
This is the default command option setting.
Important
The dellpsif filter ignores the pw and pl entries of /etc/printcap. Thus, the pw and pl entries cannot
be used to change the option of each paper size.
If the same option is specified for PostScript files which already have added options, such as paper
selection, it will be ignored.
Use the -ps option only when a PostScript file that contains no %! at the beginning of the file is
processed as the PostScript file. If a normal text file is input, it will not function correctly.
Precautions and Limitations
During Installation
Pay attention to the following points during the installation.
Solaris
Use lpadmin command to register the default printer.
# lpadmin -d Printer Name
To inhibit the banner sheets output, change the value of nobanner=no to nobanner=yes that includes in
the file corresponding to the printer name in /etc/lp/interfaces/.
The printer registered by UX filter must not be changed by admintool.
When Content types: postscript is displayed by typing lpstat -p printername -l, it's necessary
to delete the printer and reinstall.
To install UX filter into the default directory (/usr/local/dellbin5110), it's necessary to create
/usr/local directory in advance.
HP-UX
The printer to specify as an output printer must be registered in your system. To register an output
To Next Page
Loading...
Need help?
General
