Removing Options
If the printer location needs to change or the printer and print media handling options need to be shipped to
a new location, all print media handling options must be removed from the printer. For shipping, pack the
printer and print media handling options securely to avoid damage.
Removing Optional Tray Modules
Removing the Optional Memory Card
Removing the Optional Multi Protocol Card
Removing the Wireless Printer Adaptor
Removing the Optional Hard Disk
Removing Optional Tray Modules
NOTE: To lift the printer safely and replace the optional 500-sheet tray module or 1000-sheet tray
module requires two people to stand in front (operator panel side) and behind the printer and to lift at
the same time. Do not try to lift the printer from the sides.
CAUTION: To lift the printer safely, remove the imaging drum and lift it with two people.
NOTICE: Place the imaging drum on a clean flat surface. Also, cover the imaging drum with
something like newspaper to keep it out of direct light.
Some instructions may vary depending on the tray module configuration in your printer.
Turn off the printer and unplug the printer power cable.1.
Remove the paper tray cover from the back of the printer.2.
3.
To Next Page
Loading...
Need help?
General
