Dell E24S User Manual

CAUTION: To protect the I/O connector pins, install the I/O connector cover every time a sled is removed
from the enclosure.
4. Install the I/O connector cover over the I/O connector.
CAUTION: If you are permanently removing the sled, install a sled blank. Operating the system for extended
periods of time without a sled blank installed can cause the enclosure to overheat.
Figure 32. Removing and installing a compute sled
1.
enclosure 2. compute sled
3. compute sled handle 4. release button on sled handle
Next steps
Install the compute sled or sled blank.
Related tasks
Installing a compute sled on page 36
Installing a compute sled
Prerequisites
CAUTION:
Many repairs may only be done by a certified service technician. You should only perform
troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or
telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by
your warranty. Read and follow the safety instructions that are shipped with your product.
Ensure that you read the Safety instructions on page 33.
36
Installing and removing PowerEdge FX2/FX2s enclosure components

Dell E24S Specifications

General

Brand	Dell
Model	E24S
Category	Enclosure
Language	English