Menu Item Description
Boot option
Enable/Disable
This field enables or disables the boot option in UEFI Boot Sequence.
Network settings screen details
You can use the Network Settings screen to set the Boot mode from UEFI. It also allows you to specify the boot order.
About this task
You can view the Network Settings screen by clicking System Setup Main Menu > System BIOS > Network Settings.
The Network Settings screen details are explained as follows:
Menu Item Description
UEFI PXE
settings
This field controls the system network settings.
PXE Device1 This field controls the system network settings. Option is set to Enabled.
PXE Device2 This field controls the system network settings. Option is set to Disabled
PXE Device3 This field controls the system network settings. Option is set to Disabled
PXE Device4 This field controls the system network settings. Option is set to Disabled
PXE Device1
Settings
NIC interface used for this PXE device. Option is set to Enabled
Interface NIC interface used for this PXE device. Options are:
Intergrated NIC Port 1 Partition 1
Intergrated NIC Port 2 Partition 1
Intergrated NIC Port 3 Partition 1
Intergrated NIC Port 4 Partition 1
Protocol This field controls the PXE protocol used for PXE device. Options are IPv4 (set default) and IPv6
VLAN Enables or disables PXE device. Options are Enabled and Disabled (set default)
VLAN ID
Displays the VLAN ID
VLAN Priority Displays the VLAN Priority
UEFI HTTP
Settings
This field enables the BIOS to create a UEFI boot option for the HTTP device. Option is set to Disabled
HTTP Device1 This field enables the BIOS to create a UEFI boot option for the HTTP device. Option is set to Disabled
HTTP Device2 This field enables the BIOS to create a UEFI boot option for the HTTP device. Option is set to Disabled
HTTP Device3 This field enables the BIOS to create a UEFI boot option for the HTTP device. Option is set to Disabled
HTTP Device4 This field enables the BIOS to create a UEFI boot option for the HTTP device. Option is set to Disabled
UEFI ISCSI
Settigns
This field specifies the name of the ISCSI initiator (iqn format).
ISCSI Initiator
Name
This field specifies the name of the ISCSI initiator (iqn format).
ISCSI Device1 This field controls the configuration for ISCSI device.
118 BIOS and UEFI