Installing intrusion switch
Steps
1. Align the tabs on the intrusion switch with the slots on the cooling fan assembly.
2. Pull the intrusion switch up and push it until the switch locks in place.
Next steps
1. Install the cooling fan assembly.
Hard drive
Removing hard drive blank
Prerequisites
1. If installed, remove the front bezel.
CAUTION: To maintain proper system cooling, all empty hard drive slots must have hard drive blanks
installed.
Steps
Press the release button and slide the hard drive blank out of the hard drive slot.
Disassembly and reassembly 35
To Next Page
Loading...
Need help?
General
