To Next Page

To Previous Page

Option Description

iDRAC Select DHCP or Static IP to configure the network mode. If Static IP is selected, the available fields

are IP, Subnet (Sub), and Gateway (Gtw). Select Setup DNS to enable DNS and to view domain

addresses. Two separate DNS entries are available.

Set error Select SEL to view LCD error messages in a format that matches the IPMI description in the SEL. This

enables you to match an LCD message with an SEL entry.

Select Simple to view LCD error messages in a simplified user-friendly description.

Set home Select the default information to be displayed on the Home screen. See View menu section for the

options and option items that can be set as the default on the Home screen.

View menu

NOTE: When you select an option in the View menu, you must confirm the option before proceeding to the next action.

Option Description

iDRAC IP Displays the IPv4 or IPv6 addresses for iDRAC9. Addresses include DNS (Primary and Secondary),

Gateway, IP, and Subnet (IPv6 does not have Subnet).

MAC Displays the MAC addresses for iDRAC, iSCSI, or Network devices.

Name Displays the name of the Host, Model, or User String for the system.

Number Displays the Asset tag or the Service tag for the system.

Power Displays the power output of the system in BTU/hr or Watts. The display format can be configured in the

Set home submenu of the Setup menu.

Temperature Displays the temperature of the system in Celsius or Fahrenheit. The display format can be configured in

the Set home submenu of the Setup menu.

12 Chassis View

Dell E38S User Manual

Questions and Answers: