Dell E38S User Manual

Figure 18. Installing the processor and heat sink module (2U)
Expansion card
Removing expansion card from expansion card riser
Prerequisites
1. If applicable, disconnect the cables from the expansion card.
Steps
1. Lift the expansion card latch out of the slot.
2. Hold the expansion card by its edges, and pull the card until the card edge connector disengages from the expansion card
connector on the riser.
Figure 19. Removing expansion card from expansion card riser 1
Disassembly and reassembly 49

Dell E38S Specifications

General

Brand	Dell
Model	E38S
Category	Racks & Stands
Language	English