Chapter 4 : System Configurations
30
Network Parameter
No. Item Description Default
[1] HTTP Server Enable/ disable HTTP protocol. Enable
[2] HTTPS Server Enable/ disable HTTPS protocol. Enable
[3] Telnet Server Enable/ disable Telnet protocol. Enable
[4] SSH/ SFTP
Server
Enable/ disable SSH/ SFTP protocol. Enable
[5] FTP Server Enable/ disable FTP protocol. Disable
[6] Syslog Enable/ disable remote syslog. Disable
[7] HTTP Server Port HTTP networking port. 80
[8] HTTPS Server
Port
HTTPS networking port. 443