Chapter 7 : Troubleshooting
76
5) Select SSH-2 DSA from the Parameters area and select Key → Generate
key pair to generate a DSA key.
6) Select Export OpenSSH Key from Conversions and assign a file name to
the DSA key. Please ignore it when prompted to provide key passphrase.
7) Copy the generated key from the text box, paste in a text editor and save
as a text file.
8) Upload the DSA/ RSA/ Public key files to the InsightPower SNMP IPv6 for
EnviroStation Web. Please refer to 5.3 Administration – Console for more
information.
Q14. How to upload configuration / firmware / key files via SSH/ SFTP?
To quickly configure your SNMP IPv6, you can upload the files via SSH/ SFTP.
The SNMP IPv6 automatically imports your settings after the files are uploaded
to the designated directories. Refer to the following table:
Directory Files
\config_snmp snmp.ini
\config_system configure.ini
\ssh_dsa DSA Key
\ssh_rsa RSA Key
\ssh_pubkey Public Key
\upgrade_snmp EnviroStation firmware upgrade package (binary)
\upgrade_device* Device’s firmware upgrade package (binary)
* Appears on specific devices only.
Upload files to their respective directories. Make sure the filenames do not
contain non-English characters to avoid read error. Overwrite existing files if
prompted by your SFTP client.
Q15. How to test SNMPv3 in Linux?
Before you can access the SNMP OID (Object Identifier) via SNMPv3 protocol,
the SNMPv3 USM table must be organized. Please refer to 5.3.2
Notification – SNMPv3 USM for more information.
To test SNMPv3 in Linux, launch shell and key in the following command:
To Next Page
Loading...
Need help?
General
