InfraSuite EnviroStation 77
snmpwalk -v 3 -u <user> -l authPriv -A <password> -X <pass-word> -n
<context name> -t 3 <ip> 1.3.6.1.2.1.1.1.0
-v：1 for SNMPv1, 3 for SNMPv3.
-l： Follow the security levels. They are: noAuthNoPriv, authNoPriv and
authPriv.
-u：The user name which is assigned from SNMPv3 USM table.
-A：The Auth Password which is assigned from SNMPv3 USM table.
-X：The Priv Password which is assigned from SNMPv3 USM table.
-n：The Context Name which is assigned from SNMPv3 USM table.
-t： Timeout in seconds.
<ip>： The IP address of the EnviroStation.
<oid>：The next available SNMP OID (For example: 1.3.6.1.2.1.1.1.0). Please
refer to the RFC1213 MIB.
Q16. Why EnviroStation cannot monitor PDU devices?
Monitoring PDU devices is disabled (EnviroStation default). To monitor PDU
devices, please use the InsightPower SNMP IPv6 for EnviroStation Web
(Device → Management → PDU) to reset the default setting. Please refer
to Chapter 5: InsightPower SNMP IPv6 for EnviroStation Web.
To Next Page
Loading...
Need help?
General
