Denon AVR-1708 Owner's Manual

ENGLISH
:The signals are decoded in DOLBY PLllx or
DOLBY PLll for playback.
:This mode
is suited for movie sources.
:
This mode is suited for music sources.
:
This is the Pro Logic playback mode. This can
be selected when playing with a DOLBY pur
decoder. When this mode is selected, "DOLBY
PL:' is displayed.
:
This mode is suited for games.
:
This mode is suited for music sources.
:
The signals are. decoded in DTS NEO:6 for
playback.
:This mode
is suited for movie sources.
Cinema
Music
. Game
Pro Logic
Surround Modes
Standard Playback
T11S 'S tile standard mode fOI enjoYing surround sound according
to the program source
DTSNEO:6
L.. Cinema
~ Music
o When not using a surround back speaker
[Selectable items] DOLBY PLU DTS NE()jj neural
To select these surround modes using the <SELECT/ENTER> knob on
the main unit or press the
[STDj button on the main remote control
unit.
The mode switches each time the button is pressed.
o When using a surround back speaker
[Selectable items] DOLBY PLnx,+ ~IJTS.g:&. 'neural
43
I D 1
2
115
"_~·tfl&r.~etup .
. SeHemote control 10. . •.
~y)' ..
,': I
'---;::::=:::::::::::::::=::::::::::::::::::::::=:::=:""--
[Selectable items] [I]
-M,n-
When using the AVR-1708 with only the included remote control unit
(RC-l075). there
is no need to make settings.
When using a separately sold remote control unit (RC-7000CI. etc.).
this function
can be used. Match the 10 setting of the remote control
unit and the receiver.
[Selectable items]
.. ·"CIIt .;: Use room EO.
I .• :1: Do not use room EO.
A 11I 13 EO
• Room EO Setup
Select room EO setting method.
[Display)
1-1-.-~-, F-'-::;'-' .-1-'-·'-.-'-C-' F-' ---
The auto surround mode function lets you store in the memory the
surround mode last used for playing the three types of input signals
listed below.
CD Analog and PCM 2-channel signals (STEREO)
o 2-channel signals of Dolby Digital, DTS or other multi-channel
format
(DOLBY PLllx Cinema)
G) Multi-channel signals of Dolby Digital.
DTS or other multichannel
format (DOLBY/DTS SURROUND)
* Default settings are indicated in ( ).
[Selectable items]
I 8I(ij: Memorize settings. Most recently stored surround mode is
automatically selected.
,~~~: Do not memorize settings. Surround mode does not change
according to input signal.
$
c
~
N
o
:::l
<II
Gl
<II
:::
5'
co
5!:'
III
i
-""-'
(")
o
:::l
:::l
<II
~
o'
:::l
II>
•
[Selectable items]
~ :Apply settings to all surround modes.
Asajga : Make settings for each surround mode separately.
IOperations (lI3r'page 22)
:It is possible to play analog input signals and
peM (2-channel, 48 kHz or less) in the surround
mode.
This
is the optimum mode for playing sources
recorded
in XM HD Surround ((F'page 38).
29

Denon AVR-1708 Specifications

General

Speakers connectivity type	-
Receiver type	Surround
Frequency range	10 - 100000 Hz
Audio output channels	7.1 channels
Audio A/D Converter (ADC)	24-bit/96kHz
Power output per channel (1KHz@6 Ohm)	110 W
Power output per channel (20-20KHz@8 Ohm)	75 W
Equalizer	Yes
HDMI version	1.3a
Product color	Black
Audio decoders	DTS, DTS 96/24, DTS Neo:6, DTS-ES (Discrete 6.1), DTS-ES (Matrix 6.1), Dolby Digital, Dolby Digital EX, Dolby Pro Logic II, Dolby Pro Logic IIx
Apple docking compatibility	iPod
Optical drive included	No
HDMI in	2
Composite video in	4
S-Video inputs quantity	3
Headphone connectivity	6.3 mm
Number of HDMI outputs	1

Weight and Dimensions

Depth	383 mm
Width	434 mm
Height	171 mm
Weight	11100 g