Denon AVR-1708 Owner's Manual

ENGLISH
Select playback mode for surround back channels.
5B CH OUT (for Multi-channel sources)
•
Toile Control
Adjust the tonal Quality of the sound.
Tone Defeat
Turn tone adjustments off.
"Bass" and "Treble" can be set when "Tone Defeat" is set to "OFF':
,~
,~1
The tone cannot be adjusted when in the DIRECT mode.
Bass
[Selectable items]
ON Playback without tone adjustment.
OFF : Allow tone adjustment (treble, bass).
Adjust low frequency range
(bass).
Treble
[Variable range]-14dB -14dB
Adjust high frequency range (treble).
[Variable range] -14dB -14dB
The input from the subwoofer channel is attenuated.
The input from the subwoofer channel is not attenuated.
Usually use
in this mode.
ON
~:
5UBWOOFER An:
Determine whether to use surround back speakers.
5B CH OUT (for 2-channel sources)
[Selectable items]
ON : The surround back channel signal is played.
OFF : The surround back channel signal is not played.
Attenuate subwoofer level when using
EXT IN mode.
[Selectable items]
Turn subwoofer output on and off.
5ubwoofer
~.
~:i'
Set this to "ON" if the subwoofer channel level seems too high when
playing Super Audio
CD.
Resets the settings to the default values.
Default
[Selectable items]
~: The subwoofer is used.
OFF . The subwoofer is not used.
No signal
is played from the surround back
channels.
The same signals as those of the surround
channels are output from the surround
back
channels.
The surround channel signals undergo digital
matrix processing and
are output from the
surround
back channels.
MTRXON
Off
ESMTRX
ES OSCRr
NONMTU
PLnxMUSIC
PUIx CINEMA
*1 IIx
: Decoded in Dolby Pro Logic Cinema mode,
surround
back signal played.
*2
: Decoded in Dolby Pro Logic IIx Music mode,
surround
back signal played.
*3
: DTS signal played with digital matrix processing.
*4
: Signal included in DTS-ES Discrete 6.1-channel
sources played.
* 1: This can be selected when "Surround Back" is set to "2spkrs"
at the system setup menu "Speaker Setup" - "Speaker
Configuration" setting (n2Fpage
23).
* 2: This can be selected when "Surround Back" is set to "2spkrs" or
"lspkr" at the system setup menu "Speaker Setup" -"Speaker
Configuration" setting.
* 3: This can be selected when playing DTS sources.
* 4: This can be selected when playing DTS sources including a
discrete 6.1-ehannel signal identification signal.
[Selectable items]
32

Denon AVR-1708 Specifications

General

Speakers connectivity type	-
Receiver type	Surround
Frequency range	10 - 100000 Hz
Audio output channels	7.1 channels
Audio A/D Converter (ADC)	24-bit/96kHz
Power output per channel (1KHz@6 Ohm)	110 W
Power output per channel (20-20KHz@8 Ohm)	75 W
Equalizer	Yes
HDMI version	1.3a
Product color	Black
Audio decoders	DTS, DTS 96/24, DTS Neo:6, DTS-ES (Discrete 6.1), DTS-ES (Matrix 6.1), Dolby Digital, Dolby Digital EX, Dolby Pro Logic II, Dolby Pro Logic IIx
Apple docking compatibility	iPod
Optical drive included	No
HDMI in	2
Composite video in	4
S-Video inputs quantity	3
Headphone connectivity	6.3 mm
Number of HDMI outputs	1

Weight and Dimensions

Depth	383 mm
Width	434 mm
Height	171 mm
Weight	11100 g