ENGLISH
Turning Off
the
SoundTemporarily (Muting)
Press
[MUTING].
To
cancel, press
[MUTING)
again
Muting
can
also
be
canceled
by
adjusting the master volume.
Listening
with
Headphones
Plug the headphones into
<PHONES>.
The
sound from the speakers and pre-out connectors
is
automatically
cut.
tN·U.
Be
careful not
to
set the volume too high when using headphones.
Switching
the
front speakers
Press
<SPEAKER>.
Video Select
Switch video input source while listening to audio signal.
[Operation
on
the main unitl
Press
<VIDEO
SELECT>
until the desired picture
appears.
i>.Ho
cancel, press
<VIDEO
SELECT>
to select "SOURCE':
[Operation
on
the main remote control unitl
Press
[V.
SELECT]
until the desired picture appears.
*
To
cancel. press the
[V.
SELECn
button to select "SOURCE':
t~l·u.
• It
is
not possible to select HOMI input signals.
• When playing HOMI video input signals, the analog video signal of
another input source cannot
be
selected for the HOMI video output.
Checking
the
currently playing program source, etc.
Press
STATUS.
The current program source and various settings are indicated
on
the display.
Switching
the
brightness of the display
Press
DIMMER.
*The brightness of the display
can
be
adjusted
in
three steps. The
display
can
also
be
turned off.
• •
eration
1Prepare the equipment.
CDLoad
the
OVO,
CO
or other software
in
the
player.
(!GT'See the operating instructions of the respective devices.)
(1)To
playa video device, switch the monitor input.
(!GT'See the monitor's operating instructions.)
2Use
SOURCE
SELECT
to select the input source.
3
Set
[MODE
SELECTOR
1lto
"AUDIO" or "VIDEO".
(!2Fpage 43 "Remote Control Unit Operations")
4
Set
[MODE
SELECTOR
2] to the component you want
to operate.
5
Start playback.
(!2FSee the operating instructions of the respective devices.)
Listening
to
FMI
AM
Broadcasts
Basic Operation
1
Either turn
<SOURCE
SELECT>
or press
[TUNER]
to
select "TUNER".
2
Set
[MODE
SELECTOR
1] to "AUDIO".
(!GT'page 43 "Remote Control Unit Operations")
3Press
BAND
to select "FM" or "AM".
4Tune in the desired broadcast station.
CDTo
tune
in automatically (AutoTuning)
Press
[MODE)
to
light the "AUTO" indicator
on
the display, then use
TUNING
to
select the station you want to
hear.
@To
tune
in manually
(Manual
Tuning)
Press
[MODE)
to turn off the display's "AUTO" indicator, then use
TUNING
to
select the station you want to
hear.
• It
is
also
possible to switch to
"FM"
or
"AM"
in
step 1
by
pressing
[TUNER).
• If the desired station cannot
be
tuned
in
with auto tuning, tune it
in
manually.
• When tuning
in
stations manually, press
and
hold
TUNING
to change
frequencies continuously.
36
I
To Next Page
Loading...
Need help?
General
Weight and Dimensions
