Dolby Digital mode and DTS Surround (only
with digital input)
2
Play a program source with the
, mark.
• The Dolby Digital indicator lights when
playing Dolby Digital sources.
• The DTS indicator lights when playing DTS
sources.
light
light
light
light
Press the SURROUND BACK button.
Lights when the Surround Back CH is on.
3
Press the SURROUND PARAMETER button.
• The surround parameter menu is displayed.
4
Press the CURSOR
DD
or
HH
button to select the
parameter.
5
Press the CURSOR
FF
or
GG
button to select the
setting.
6
Press the ENTER or SURROUND PARAMETER
button to complete the setting.
1
Press the STANDARD button to select
“STANDARD (Dolby/DTS Surround)” mode.
• When “Default” is selected and the CURSOR
FF
button is
pressed, “CINEMA EQ.” and “D.COMP.” are automatically
turned off, “LFE” is reset, and “TONE” is set to the default
value.
To Next Page
Loading...
Need help?
General
