Denon AVR-3806 User Manual

34
Basic Operation Basic Operation
Dolby Pro Logic
II
x (Pro Logic
II
) mode
STANDARD
CURSOR
SURROUND
PARAMETER
ENTER
1
Press the STANDARD button to select “Dolby
Pro LogicIIx” mode.
2
Play a program source
with the mark.
4
Press the CURSOR
FF
or
GG
button to select the
play mode.
Display
MODE: PL x C
*Surr Parameter
MODE: PL x M
*Surr Parameter
MODE: PL x G
*Surr Parameter
(Pro LogicII x Cinema mode)
(Pro LogicII x Music mode)
(Pro Logic
II x Game mode)
(Pro Logic
II Cinema mode)
(Pro LogicII Music mode)
(Pro LogicII Game mode)
When the “SB CH OUT” parameter is set to “ON”. (Set
“Sp.Back” at the System Setup to “1spkr” or “2spkrs”).
The mode switches as shown below each time the
STANDARD button is pressed.
For operating instructions, refer to the manuals of the
respective components.
DTS NEO:6DOLBY PLIIx
3
Press the SURROUND PARAMETER button.
• The surround parameter menu is displayed.
5
Press the CURSOR
DD
or
HH
button to select the
various surround parameters.
Example: DOLBY PLII x Music mode screen
When set with the on screen display using the remote
control unit while in the MUSIC mode, set the “ ” mark
to “OPTIONS 0” pressing the CURSOR
DD
or
HH
button, then
press the CURSOR
FF
button.
Press the ENTER button to return to the previous screen.
ENTER
ON SCREEN
CURSOR
SURROUND
PARAMETER
STANDARD
•To play in the PLIIx mode, set “Sp.Back” at the Speaker
Configuration setting to “1spkr” or “2spkrs”.
•To play in the PLII x mode, set “Surround Back” at the Power
Amp Assign setting.
When the “SB CH OUT” parameter is set to “OFF”. (Set
“Sp.Back” at the System Setup to “None”).
Display
MODE: PL C
*Surr Parameter
MODE: PL M
*Surr Parameter
MODE: PL G
*Surr Parameter
*Surr Parameter
MODE: DOLBY PL
(Dolby Pro Logic mode)
ENGLISH
ENGLISH

Denon AVR-3806 Specifications

General

Brand	Denon
Model	AVR-3806
Category	Receiver
Language	English