Denon AVR-3806 User Manual

41
Basic Operation Basic Operation
1
Set the input source to “TUNER”.
(Main unit)
(Remote control unit
in the AMP mode)
2
Press the TUNER button on
the remote control unit to
select the TUNER mode.
3
Auto tuning Manual tuning
• When in the auto tuning mode on the FM band, the “STEREO”
indicator lights on the display when a stereo broadcast is tuned
in. At open frequencies, the noise is muted and the “TUNED”
and “STEREO” indicators turn off.
• When the manual tuning mode is set, FM stereo broadcasts are
received in monaural and the “STEREO” indicator turns off.
4
Press the MODE button to set the auto tuning
mode.
• “Auto” appears on the display.
5
Press the TUNING button.
• Automatic searching begins, then stops when a station is
tuned in.
• If tuning does not stop at the desired station, use to the
“Manual tuning” operation.
Listening to the radio
TUNING PRESET
FUNCTION
(Remote control unit)
Check that the remote control unit is set to AMP or TUNER.
1
Set the input source to “TUNER”.
2
Press the TUNER button on the remote control
unit to select the TUNER mode.
3
4
Press the MODE button to set the manual tuning
mode.
Check that the display’s “AUTO” indicator turns off.
Watching the display, press the BAND button to
select the desired band (AM or FM).
Watching the display, press the BAND button to
select the desired band (AM or FM).
TUNER
MEMORY BLOCK
MEMORY
ON SCREEN
SHIFT
CHANNEL
NUMBER
TUNING
MODE
BAND
TUNER
5
Press the TUNING button to tune in the desired
station.
The frequency changes continuously when the button is
held in.
ENGLISH
ENGLISH

Denon AVR-3806 Specifications

General

Brand	Denon
Model	AVR-3806
Category	Receiver
Language	English