Denon AVR-3806 User Manual

Basic Operation Basic Operation
ENGLISH
ENGLISH
1
Set the input source to “TUNER”.
2
Press the TUNER button on the remote control
unit to select the TUNER mode.
TP search
Use this function to find RDS stations broadcasting traffic
program (TP stations).
3
Press the SEARCH button until “TP SEARCH”
appears on the display.
RDS SEARCH PTY SEARCH
RT ON TP SEARCH
Display
1
Set the input source to “TUNER”.
2
Press the TUNER button on the remote control
unit to select the TUNER mode.
RT (Radio Text)
“RT” appears on the display when radio text data is received.
3
Press the SEARCH button until “RT ON”
appears on the display.
The main unit’s display switches as follows each time the
SEARCH button is pressed.
5
To continue searching, repeat step 3.
If no other TP station is found when all the frequencies are
searched, “NO PROGRAMME” is displayed.
RDS SEARCH PTY SEARCH
RT ON TP SEARCH
Display
While receiving an RDS broadcast station, the text data
broadcast from the station is displayed.
To turn the display off, press the CURSOR
FF
or
GG
button.
If no text data is being broadcast, “NO TEXT DATA” is
displayed.
The main unit’s display switches as follows each time the
SEARCH button is pressed.
4
Press the CHANNEL button.
• Automatically begin the TP search operation.
If no TP station is found with above operation, all the
reception bands are searched.
The station name is displayed on the display after searching
stops.
5
Press the CHANNEL button.
• Automatically begin the PTY search operation.
If there is no station broadcasting the designated program
type with above operation, all the reception bands are
searched.
The station name is displayed on the display after searching
stops.
6
To continue searching, repeat step 4.
If no other station broadcasting the designated program
type is found when all the frequencies are searched, “NO
PROGRAMME” is displayed.
44

Denon AVR-3806 Specifications

General

Brand	Denon
Model	AVR-3806
Category	Receiver
Language	English