DigiTech JamMan Solo User Manual

13
1
1
2
3
4
Select an empty memory
location using the LOOP
SELECT buttons (the
LOOP and SINGLE LEDs
will be off).
Press the PEDAL
SWITCH and beging
playing to start recording
a loop. The STATUS LED
will light solid red to
indicate recording is now
taking place.
When you are finished
recording, press the
PEDAL SWITCH once
to set the loop point
and have the phrase
play back in a repeating
loop. Press the PEDAL
SWITCH two times
quickly to stop the loop
playback.
Once you are finished
recording, the LOOP LED
will be lit green indicating
a phrase has been
recorded. The STORE
button will also be lit
indicating the phrase must
be stored to a loop
memory location to be
recalled later. See page
20 for more about
Storing phrases.
NOTE: The maximum loop time is 10 minutes.
Create a Loop (PDL TEMPO LED is off)

DigiTech JamMan Solo Specifications

General

Brand	DigiTech
Model	JamMan Solo
Category	Music Pedal
Language	English