2
Description of Controls
1. Card Memory LED
This red LED lights when you are selecting
loop memories on the optional SD/SDHC
memory card. When this LED is off, loops
are being selected from the JamMan
®
Solo’s internal memory.
2. Single LED
This yellow LED indicates the current
phrase memory is set to playback only
once when play is initiated. Single phrases
can be converted to Loop phrases and
vice versa.
3. Loop LED
This green LED indicates the current
phrase memory is set to play back
continuously as a loop when play is
initiated. Loop phrases can be converted
to Single phrases and vice versa.
To Next Page
Loading...
Need help?
General
