DigiTech JamMan Solo User Manual

34
The JamMan
®
Solo uses both internal memory and optional external memory for the
storage of loop files. You can delete all loops from internal memory or from external
memory without having to delete them one at a time. To delete all loops from internal
memory, follow these steps:
2
1
3
Press and hold the STORE
button for four seconds until
Ei (Erase Internal Memory
Loops) appears in the
DISPLAY and release (EL
will show briefly first but
keep holding the button).
The STORE button will now
be flashing.
Press the STORE button
again. The DISPLAY will
now read E? (Erase
Loops?) and the button will
continue to flash. To abort
this procedure, press the
PEDAL SWITCH at any
time.
To erase all loop data,
press and hold the STORE
button again for two more
seconds. The DISPLAY
will show Bu (busy)
indicating all internal
memory loops are being
erased.
Erase All Loop Phrases (Internal Memory)

DigiTech JamMan Solo Specifications

General

Brand	DigiTech
Model	JamMan Solo
Category	Music Pedal
Language	English