DigiTech JamMan Solo User Manual

25
2
1
Select a previously recorded Loop phrase
(LOOP or SINGLE LED is lit) using the LOOP
SELECT buttons. The TEMPO button will
begin flashing at the phrase’s stored tempo.
To change the phrase tempo, tap the
TEMPO button two or more times while
the loop is either stopped or playing.
Tapping quicker than the stored tempo
rate will speed up playback while tapping
slower than the stored tempo rate will
slow down playback.
4
3
To return to the original
tempo, press and hold the
TEMPO button for two
seconds and the phrase
will return to the original
stored tempo.
The STORE button will
light to indicate any
changes to the phrase
tempo and these changes
must be stored if it is to
be recalled later.
Changing Loop Tempo
Press the STORE button twice to store Tempo changes if desired. You can play along
with the adjusted playback speed and still be in tune since the pitch does not change
based on playback speed.
Once a loop phrase is recorded and stored to memory, you can speed up or slow
down the playback of the phrase without changing its pitch. Storing a changed tempo
is permanent and once completed, the original tempo cannot be restored. To change a
loop’s tempo, follow these steps:

DigiTech JamMan Solo Specifications

General

Brand	DigiTech
Model	JamMan Solo
Category	Music Pedal
Language	English