DigiTech JamMan Solo User Manual

38
It is recommended any memory card that
is inserted into the JamMan
®
Solo for
the first time should be formatted using
the JamMan Solo’s format procedure. To
format an SD/SDHC Card in the JamMan
Solo, follow these steps:
Press and hold the 1. STORE button
for six seconds. The DISPLAY will
show FO (Format Card) and the
STORE button will begin flashing.
Press the 2. STORE button again. The
DISPLAY will read F? (Format ?)
and the STORE button will continue
to flash. To abort this procedure,
press the PEDAL SWITCH at any
time.
To initiate the card formatting 3.
procedure, press and hold the
STORE button again for two
seconds. The DISPLAY will show
Bu indicating the card is being
formatted.
NOTE: If when you try to format an SD
card the display flashes CP during step 3,
the SD copy protection switch is in the
“Locked” position.
Formatting SD Cards

DigiTech JamMan Solo Specifications

General

Brand	DigiTech
Model	JamMan Solo
Category	Music Pedal
Language	English