DigiTech JamMan Solo User Manual

40
Optional FS3X Footswitch
The optional FS3X Footswitch gives you hands-free control over loop selection, tempo,
and stop functions.
Mode Switch
When the selected loop
memory is empty, this
footswitch can be used to
set the loop tempo. If the
loop is recording, playing, or
overdubbing, this footswitch
will stop any of these func-
tions with a single press. If
this footswitch is pressed
and held, it will clear any new
loop or overdubs made to an
existing loop that have not
been stored.
Down Switch
This footswitch selects the
next lower memory location.
Press and hold for two
seconds to scroll through the
memory locations more
quickly.
Up Switch
This footswitch selects the
next higher memory loca-
tion. Press and hold for two
seconds to scroll through the
memory locations more
quickly.

DigiTech JamMan Solo Specifications

General

Brand	DigiTech
Model	JamMan Solo
Category	Music Pedal
Language	English